MSS Box II hardware




Hardware specification:

- Dimensions: (LxHxW) 70x33x70mm
- Weight: 120 gramm
- Power: 7.5V (not required for normal operation in most cases)
- USB hub: 2 ports, builtin
- Smartcard reader: 1 internal (for box upgrade), 1 external
(for use with 3rd party software which uses smartcards)
- MMC reader: builtin
- USB service port: available
- RJ45 port: available
- JTAG : yes


Ports description:

1	Universal RJ45 configuration port - Configurable Virtual COM port mode. You can configure this connector as high-speed COM-port or any GSM product communication devices or special cable - Vygis box, Infinity box, Cruiser box, SETool box, Cruiser USB UC-10 Cable and etc. Can also be used as configurable JTAG interface. For low level programming. Can be used for repairing boot problems on any mobile device, unlocking without drilling metal cover on some Motorola phones.
2	SD/MMC CardReader. This slot can be used for low level SD/MMC card formatting/repairing/password reset.
3	Integrated smart card reader - You can use your box as a smartcard reader with any smartcard based software (SETool,Cruiser,Infinity,Vygis, etc)
4	USB Service Port - Can be used as service interface for mobile phones which use USB protocol for service/programming.
5	Integrated USB 2.0 hub with 2 ports. You can connect any other USB device (like MSS4 HASP, UFS Box, USB Drive, USB Dongle, printer, etc)
6	Power: 7.5V (not required for normal operation in most cases). Can be used to power devices which require to be externally powered.
7	PC USB connection port. Used to connect your Box to your PC.:

* Please kindly note, that the color and size of the box may differ.